Caulks Creek Force Main Break-Maryland Heights

Crews and contractors with the Metropolitan St. Louis Sewer District (MSD) are working to repair an underground force main sewer break in Maryland Heights, Missouri.
The location of the break is 673 Water Works Road in Maryland Heights.

Crews and contractors with the Metropolitan St. Louis Sewer District (MSD) are working to repair an underground force main sewer break in Maryland Heights, Missouri.
The location of the break is 673 Water Works Road in Maryland Heights. The break was discovered early Tuesday morning by a MSD contractor performing a routine force main inspection. The contractor has been working onsite to construct a new replacement force main sewer to run alongside the existing in-service force main sewer. Because the existing force main has experienced recent breaks, the contractor on the project is required to conduct daily visual inspections of the entire length of the existing force main for the duration of the project.  The construction of the new force main was accelerated by MSD due to a history of breaks along this line, which was originally built in 1983. Construction began in March of 2016 on the two-phase replacement project that is estimated to cost $6.5 million. MSD has mobilized equipment to the site to make the repair. The break of the in-service force main is leaking into a ditch and the leak is being contained near the break.

Pump stations upstream of the break will be shut down to allow for repairs. The shutdown is currently planned to begin this later afternoon and will continue until the pipe is repaired. Shutting down the pump stations will cause sewer overflows in Chesterfield. Affected areas potentially include:
• Caulks Creek near the intersection of Crystal Spring Drive and Brighthurst Drive in Chesterfield.
• Portions of the walk/bike trail that runs along the Monarch Chesterfield levee south of Chesterfield Commons.
• Other portions of Caulks Creek.
• Portions of Bonhomme Creek.

MSD has placed warning signs in these areas, advising the public of the overflows. While there is no immediate threat to public health or safety, the public is asked to heed the signs and avoid contact with the affected areas. If a member of the public should come in contact with these areas, they should immediately and thoroughly wash with soap and water.

MSD will monitor manholes throughout the area. If a member of the public should come across what they suspect to be an overflowing manhole, they should contact MSD’s 24-hour Customer Service Center at (314) 768-6260.

While the pump stations are shut down, MSD will use vacuum trucks to transport the sewage at the pump stations to MSD’s Missouri River Wastewater Treatment Plant. The use of vacuum trucks will help reduce the amount of wastewater that overflows from manholes. The trucks are equipped with large storage tanks and will vacuum up the sewage as it accumulates at each pump station. Once a truck is full, it will leave for the treatment plant and another truck will take its place.

The suspected force main break and shutting down the pump stations will not affect sewer service to homes and businesses in the area.

Once repairs are complete and full operations of the force main sewer resume, cleanup at the break and associated overflow locations will commence.

A force main sewer is a sewer line through which wastewater is propelled by the force of pump stations located along the path of the sewer. Pump stations are sometimes necessary to overcome gravity and allow for the transport of wastewater to area treatment plants. Force mains are made of cast iron and can last anywhere from 25 to 50 years, depending upon the amount of flow the line handles and the corrosive properties of the wastewater.

The force main sewer break and associated overflows at the manholes have been reported to the Missouri Department of Natural Resources, as required by law.